Transparency files
Moderator: rotton50
-
- Site Admin
- Posts: 4407
- Joined: Tue Feb 03, 2004 12:52 am
- Location: A slit trench near RAF Gravesend
- Contact:
Transparency files
Do I properly understand that we can now have a number of transparency files for any plane i.e not simply TEX and TRA, but MEX and MRA etc? Can someone point me to the definitive list of these file links?
Many thanls. I missed that staff meeting
Many thanls. I missed that staff meeting
Moggy
www.mogggy.org
www.mogggy.org
-
- Site Admin
- Posts: 4407
- Joined: Tue Feb 03, 2004 12:52 am
- Location: A slit trench near RAF Gravesend
- Contact:
Re: Transparency files
I saw this thread:
viewtopic.php?f=20&t=5995&p=38016&hilit ... nks#p38016
I remember John Gibbon going off a lot about this a while back, and we put in a whole list of transparency links.
The reason I ask is that I am trying to bodge an old model for testing purposes and can't get GEX or MEX to pick up transparency from GRA and MRA.
viewtopic.php?f=20&t=5995&p=38016&hilit ... nks#p38016
I remember John Gibbon going off a lot about this a while back, and we put in a whole list of transparency links.
The reason I ask is that I am trying to bodge an old model for testing purposes and can't get GEX or MEX to pick up transparency from GRA and MRA.
Moggy
www.mogggy.org
www.mogggy.org
-
- Warrant Officer
- Posts: 2918
- Joined: Sun Sep 10, 2006 1:30 pm
- Location: Cape Charles, Virginia, USA
Re: Transparency files
TEX/TRA
PEX/PRA
MEX/MRA
SEX/SRA
V/VTR
Y/YTR
Z/ZTR ( Not sure about this one but I seem to remember using it at some point)
FWIW, I now use the PEX/PRA set for props, both internal and external. Of course, there are a lot of exceptions to that since there are so many models available now.
As to why it's not working for (M), are you using *******M.tpc or *****MEX.tpc?
PEX/PRA
MEX/MRA
SEX/SRA
V/VTR
Y/YTR
Z/ZTR ( Not sure about this one but I seem to remember using it at some point)
FWIW, I now use the PEX/PRA set for props, both internal and external. Of course, there are a lot of exceptions to that since there are so many models available now.
As to why it's not working for (M), are you using *******M.tpc or *****MEX.tpc?
-
- Site Admin
- Posts: 4407
- Joined: Tue Feb 03, 2004 12:52 am
- Location: A slit trench near RAF Gravesend
- Contact:
Re: Transparency files
I've tried with MEX/MRA but nothing doing. I will try the others and check I'm not doing anything idiot wrong.
Moggy
www.mogggy.org
www.mogggy.org
-
- Warrant Officer
- Posts: 2918
- Joined: Sun Sep 10, 2006 1:30 pm
- Location: Cape Charles, Virginia, USA
Re: Transparency files
How about SEX?
Wait, let me rephrase that.
Tell us about your experience with SEX.
No, that's not it.
Ah, let's just say I'm pretty sure SEX will work.
If it doesn't, you have bigger problems than EAW.
Wait, let me rephrase that.
Tell us about your experience with SEX.
No, that's not it.
Ah, let's just say I'm pretty sure SEX will work.
If it doesn't, you have bigger problems than EAW.
Re: Transparency files
In the "EAWTM2" folder there are the two default texture mapping files, "TextMap1.str" and "TextMap2.str".
I used the string editor twice and put them together on my desktop:
Corresponding lines match.
There is no PlaneMEX-PlaneMRA link, but there used to be.
For some reason it created problems with some of Iron Mike's multiskins, so I deleted it.
I used the string editor twice and put them together on my desktop:
Corresponding lines match.
There is no PlaneMEX-PlaneMRA link, but there used to be.
For some reason it created problems with some of Iron Mike's multiskins, so I deleted it.
-
- Warrant Officer
- Posts: 2918
- Joined: Sun Sep 10, 2006 1:30 pm
- Location: Cape Charles, Virginia, USA
Re: Transparency files
Ah yes, that was during the problem with the wingviews not displaying properly on the B26 and B17 multiskins.
-
- Site Admin
- Posts: 4407
- Joined: Tue Feb 03, 2004 12:52 am
- Location: A slit trench near RAF Gravesend
- Contact:
Re: Transparency files
Thanks Jel,
I supposed this was set out somewhere, but couldn't think where to look.
Ray. Assuming from that SEX is good. But will experiment to find out
I supposed this was set out somewhere, but couldn't think where to look.
Ray. Assuming from that SEX is good. But will experiment to find out
Moggy
www.mogggy.org
www.mogggy.org
-
- Member of the Code Committee
- Posts: 1258
- Joined: Wed Sep 26, 2007 11:49 am
- Location: Finksburg, Maryland USA
Re: Transparency files
The wing view issue came with the B-17 model. That is the only model that had that problem I was aware of. I didn't try to fly the B-26 but did comment on the wing display problem on the 17 when I was painting the 100th Bomb Group. But, since the 17 was mainly a target my calls for help went unanswered.
So,the m.3dz only effected those two models. The Ju-88, He-111, P-38, Me-410 and all single engine models work well with it. And as y'all know many models use the m.tex for the prop so, eliminating the m creates ripples across the model.
So,the m.3dz only effected those two models. The Ju-88, He-111, P-38, Me-410 and all single engine models work well with it. And as y'all know many models use the m.tex for the prop so, eliminating the m creates ripples across the model.
If all else fails, punt. Or, RUN AWAY!!!
-
- Site Admin
- Posts: 4407
- Joined: Tue Feb 03, 2004 12:52 am
- Location: A slit trench near RAF Gravesend
- Contact:
Re: Transparency files
Mike - I've been flying the He177 MS at the moment and seeing a glitch with the props, not in the first plane but further down the line. Could this be a set done in 1013 before the naming convention was sorted out?
Moggy
www.mogggy.org
www.mogggy.org
-
- Warrant Officer
- Posts: 2918
- Joined: Sun Sep 10, 2006 1:30 pm
- Location: Cape Charles, Virginia, USA
Re: Transparency files
Is this the He177 from the 1.6 inventory?
What's the MS in He177 MS mean?
What's the MS in He177 MS mean?
Re: Transparency files
Multiskin is my guess
-
- Site Admin
- Posts: 4407
- Joined: Tue Feb 03, 2004 12:52 am
- Location: A slit trench near RAF Gravesend
- Contact:
Re: Transparency files
I didn't find one in the 160 inventory, three multiskins were done shortly after Flyright finished the model in 2013.
Been sitting in my Steinbock setup for a while.
Been sitting in my Steinbock setup for a while.
Moggy
www.mogggy.org
www.mogggy.org
-
- Warrant Officer
- Posts: 2918
- Joined: Sun Sep 10, 2006 1:30 pm
- Location: Cape Charles, Virginia, USA
Re: Transparency files
Look in the Alt Planes folder. I built 4 models from the old "Firm's" model.
A1
A3-R5
B4
plus
He274 V5
A1
A3-R5
B4
plus
He274 V5