EAW WW1 Theatre

[rotton50]

On my end I'm putting the finishing touches on the Vickers gun bus which will lead to the FE2b without too much effort.

The Be2c should be too hard either, as I'll start with one of the German observation planes as a base.

Those big German bombers OTOH. Ooof.

Will your setup have any water tiles? Some of the models already in the inventory were adapted to floats but I don't want to spend any energy on something that won't get used.

[Moggy]

Basically using the default European map area. So yes to floatplanes.

Those big German bombers are certainly a sight.

[EdLaz]

Hi everyone, any news?

[Moggy]

I'm still working on the layout of target locations.



I suspect Ray is still working on planes.

[rotton50]

Haven't had a lot of time due to real life stuff.

I had a heck of a time solving R/S issues with the FE2b but it's now about 90% finished, just have to install the engine and prop.

Then it's on to the BE2 which should be a lot easier since it's just a matter of manipulating some elements.

After that I thought I'd do some easy projects like skinning existing planes with different national markings.

I suppose at some point moggy and I will collaborate on target editing.

[rotton50]

Once again, never make assumptions when it comes to 3dz modeling. Both the FE2b and especially the FB5 turned out to be a real challenge. All those struts caused major R/S issues. However the models are complete, along with the Be2c.

I can now work on the flight models which shouldn't be as challenging as the wireframes were.

Be2c


FE2b.jpg


FB.5.jpg


I need some suggestions for more German planes as the inventory is getting a bit lopsided with Allied ones.

[Moggy]

Great models Ray



I will check with my list of required German aircraft to see what else is needed.